WALL ASSEMBLIES
JAMES HARDIE BUILDING PRODUCTS, INC. - Mission Viejo, CA USA


Show details for General InformationGeneral Information
Show details for DESIGN NO. JH/WA 60-01DESIGN NO. JH/WA 60-01
Show details for DESIGN NO. JH/WA 60-02DESIGN NO. JH/WA 60-02
Show details for DESIGN NO. JH/WA 60-03DESIGN NO. JH/WA 60-03
Show details for DESIGN NO. JH/WA 60-04DESIGN NO. JH/WA 60-04
Show details for DESIGN NO. JH/WA 60-05DESIGN NO. JH/WA 60-05
Show details for DESIGN NO. JH/WA 60-06DESIGN NO. JH/WA 60-06
Show details for DESIGN NO. JH/WA 60-07DESIGN NO. JH/WA 60-07
Show details for DESIGN NO. JH/WA 60-08DESIGN NO. JH/WA 60-08
Show details for DESIGN NO. JH/WA 60-09DESIGN NO. JH/WA 60-09
Hide details for DESIGN NO. JH/WA 60-10DESIGN NO. JH/WA 60-10
DESIGN NO. JH/WA 60-10
NON-SYMMETRICAL LOAD-BEARING WALL ASSEMBLY; FULL DESIGN LOAD

1.Wood Studs: Nominal 2" by 4" solid sawn wood studs located 24" oc, with two top plates and a single bottom plate.
2.Insulation (Required): Glass fiber batt insulation, conforming to CSA-A101 Glass Fiber Insulation minimum 0.6kg/mē.
3.Gypsum Wallboard, Side A: 5/8" Type X gypsum wallboard, oriented vertically and fastened with 1-3/4" cup-head gypsum nails, spaced 7" oc at board edges and in field areas, or 1-1/2" Type S drywall screws, spaced 8" oc at board edges and in field areas of boards.
Gypsum Sheathing, Side B: 5/8" Type X gypsum sheathing fastened with 1-3/4" long roofing nails spaced 7" oc. Sheathing edge joints shall be staggered from those on opposite sides of the wall.
4.Fibre-cement Exterior Siding: 5/16" thick Hardipanel vertical siding applied as per manufacturer’s installation instructions.




Show details for Evaluated to the following...Evaluated to the following...