WALL ASSEMBLIES
JAMES HARDIE BUILDING PRODUCTS, INC. - Mission Viejo, CA USA
General Information
DESIGN NO. JH/WA 60-01
DESIGN NO. JH/WA 60-02
DESIGN NO. JH/WA 60-03
DESIGN NO. JH/WA 60-04
DESIGN NO. JH/WA 60-05
DESIGN NO. JH/WA 60-06
DESIGN NO. JH/WA 60-07
DESIGN NO. JH/WA 60-08
DESIGN NO. JH/WA 60-09
DESIGN NO. JH/WA 60-10
Evaluated to the following...
Design listings are based on, and supported by, proprietary test reports. The test reports further define proprietary design details which make these listings applicable only to the specified products manufactured by the listed manufacturer.
Unless otherwise noted, the assemblies in this section have been evaluated for conformance to the following standards:
ASTM-E119, Standard Methods of Fire Tests of Building Construction and Materials.
CAN/ULC-S101, Standard Methods of Fire Endurance Tests of Building Construction and Materials.
NFPA-251, Fire Tests of Building Construction and Materials.
UBC-7-1-94, Uniform Building Code Standard.
UL-263, Fire Tests of Building Construction and Materials.
Designs listed are minimum construction requirements to achieve fire rating.
Unless otherwise noted, fire ratings apply to tests conducted on both sides.
NOTE: Design No. 408 is not used in this edition.