WALL ASSEMBLIES
JAMES HARDIE BUILDING PRODUCTS, INC. - Mission Viejo, CA USA


Show details for General InformationGeneral Information
Hide details for DESIGN NO. JH/WA 60-01DESIGN NO. JH/WA 60-01
DESIGN NO. JH/WA 60-01
NON-LOAD-BEARING WALL ASSEMBLY
1.Steel Studs: Minimum 3-5/8" depth 20 gauge (0.0359") galvanized steel studs, spaced 24" oc maximum.
2. Gypsum Wallboard, Side A: 5/8" Type X gypsum wallboard, oriented vertically and fastened with 1-1/4" Type S drywall screws, spaced 8" oc at board edges, and 12" oc
in field areas of boards.
Gypsum Sheathing, Side B: 1/2" Type X or 5/8" Type X gypsum sheathing, oriented vertically with edge joints staggered from those of Side A, fastened with 1-1/4" Type S drywall screws spaced 24" oc.
3. Fibre-cement Facing, Side B: Minimum 1/4" Titan® (tapered edge) panel, Hardibacker® (square edge) backerboard, Hardipanel vertical siding, or Harditex® baseboard applied vertically, with vertical edges staggered 24" from those of gypsum sheathing substrate. Panel, backerboard, or baseboard is fastened through gypsum sheathing to framing members with minimum 1-5/8" long by 0.323" HD self-drilling ribbed buglehead (or waferhead) screws, located a maximum 8" oc.
Show details for DESIGN NO. JH/WA 60-02DESIGN NO. JH/WA 60-02
Show details for DESIGN NO. JH/WA 60-03DESIGN NO. JH/WA 60-03
Show details for DESIGN NO. JH/WA 60-04DESIGN NO. JH/WA 60-04
Show details for DESIGN NO. JH/WA 60-05DESIGN NO. JH/WA 60-05
Show details for DESIGN NO. JH/WA 60-06DESIGN NO. JH/WA 60-06
Show details for DESIGN NO. JH/WA 60-07DESIGN NO. JH/WA 60-07
Show details for DESIGN NO. JH/WA 60-08DESIGN NO. JH/WA 60-08
Show details for DESIGN NO. JH/WA 60-09DESIGN NO. JH/WA 60-09
Show details for DESIGN NO. JH/WA 60-10DESIGN NO. JH/WA 60-10




Show details for Evaluated to the following...Evaluated to the following...