WALL ASSEMBLIES
JAMES HARDIE BUILDING PRODUCTS, INC. - Mission Viejo, CA USA


Show details for General InformationGeneral Information
Show details for DESIGN NO. JH/WA 60-01DESIGN NO. JH/WA 60-01
Hide details for DESIGN NO. JH/WA 60-02DESIGN NO. JH/WA 60-02
DESIGN NO. JH/WA 60-02
NON-SYMMETRICAL, NON-LOAD-BEARING WALL ASSEMBLY
1.Steel Studs: Minimum 3-5/8" depth, 25 gauge galvanized steel studs, spaced 16" oc.
2.Insulation: Stud cavities insulated with 3" thickness of 3 pcf mineral fiber batt insulation (rockwool), complying with ASTM-C665, Type I.
3.Gypsum Wallboard, Side A: 5/8" Type X gypsum wallboard installed horizontally or vertically and fastened with minimum 1" Type S drywall screws, 8" oc along floor and ceiling runners and 12" oc at intermediate studs. Joints in wallboard to be taped and filled.
4.Fibre-cement Board, Side B: 7/16" Titan® panel, Harditex® baseboard, or Hardibacker® backerboard, applied vertically with vertical edges staggered 16" and fastened with 1" long No. 8 by 0.323" HD self-drilling ribbed buglehead or equivalent furring screws, 8" oc along floor and ceiling runners and intermediate studs. Joints finished with glass fiber mesh tape and standard latex-modified thickset mortar. Titan® panel and Hardibacker® backerboard may be faced with ceramic tile.
Show details for DESIGN NO. JH/WA 60-03DESIGN NO. JH/WA 60-03
Show details for DESIGN NO. JH/WA 60-04DESIGN NO. JH/WA 60-04
Hide details for DESIGN NO. JH/WA 60-05DESIGN NO. JH/WA 60-05
DESIGN NO. JH/WA 60-05
SYMMETRICAL/NON-LOAD-BEARING WALL ASSEMBLY
1.Steel Studs: Minimum 3-5/8" depth, 20 gauge (0.0359") galvanized steel studs, spaced 24" oc maximum, with corresponding top and bottom tracks.
2.Gypsum Wallboard/Sheathing (Base Layer): 1/2" Type X gypsum wallboard or gypsum sheathing for exterior wall applications, applied horizontally or vertically and fastened with minimum 1" Type S drywall screws, located 24" on floor and ceiling runners and intermediate studs. Base layer wallboard joints staggered 24" from those of base layer on opposite side of studs.
3.Fibre-cement Board (Face Layer): 1/4" thick Titan® panel or Hardibacker® backerboard (for interior wall application), or Harditex® baseboard (for exterior wall applications), applied horizontally or vertically over gypsum wallboard and fastened with 1-5/8" long by 0.323" HDC-drill screws, located 8" oc on floor and ceiling runners and intermediate studs. Face layer panel joints staggered from those of base layer by 24". Face layer joints taped with joint tape and 2 layers of gypsum joint compound. Screw heads filled with gypsum joint compound.
Show details for DESIGN NO. JH/WA 60-06DESIGN NO. JH/WA 60-06
Hide details for DESIGN NO. JH/WA 60-07DESIGN NO. JH/WA 60-07
DESIGN NO. JH/WA 60-07
NON-SYMMETRICAL, NON-LOAD-BEARING WALL ASSEMBLY
1.Steel Studs: Minimum 3-5/8" depth, 25 gauge galvanized steel studs, spaced 16" oc.
2.Insulation: Minimum 3" thickness, 3 pcf mineral fiber batt insulation (rockwool), conforming to ASTM-C665 Type I, friction fit in joist cavities.
3.Gypsum Wallboard, Side A: 5/8" Type X gypsum wallboard installed horizontally or vertically and fastened with minimum 1-1/4" Type S drywall screws, 8" oc at board perimeter and in field areas of boards.
4.Fibre-cement Board, Side B: 13/32" Hardibacker 500® backerboard, applied horizontally or vertically and fastened with minimum 1" long No. 8 by 0.323" HD ribbed furring screws, located 8" oc along board perimeter and in field areas of boards.
5.Ceramic Tile: Nominal 4" by 4" by 1/4" standard grade ceramic wall tile.
Show details for DESIGN NO. JH/WA 60-08DESIGN NO. JH/WA 60-08
Show details for DESIGN NO. JH/WA 60-09DESIGN NO. JH/WA 60-09
Show details for DESIGN NO. JH/WA 60-10DESIGN NO. JH/WA 60-10




Show details for Evaluated to the following...Evaluated to the following...