WALL ASSEMBLIES
JAMES HARDIE BUILDING PRODUCTS, INC. - Mission Viejo, CA USA


Show details for General InformationGeneral Information
Show details for DESIGN NO. JH/WA 60-01DESIGN NO. JH/WA 60-01
Show details for DESIGN NO. JH/WA 60-02DESIGN NO. JH/WA 60-02
Hide details for DESIGN NO. JH/WA 60-03DESIGN NO. JH/WA 60-03
DESIGN NO. JH/WA 60-03
NON-SYMMETRICAL, LIMITED LOAD-BEARING WALL ASSEMBLY
MAXIMUM LOAD - LESSER OF 800 LBS./STUD OR 31% OF FULL DESIGN LOAD
1.Wood Studs: Nominal 2" by 4" solid sawn wood studs located 16" oc. With two top plates and a single bottom plate.
2.Insulation: Minimum 3" thickness, 3 pcf mineral fiber batt insulation, conforming to ASTM-C665 Type I, friction fit in joist cavities.
3.Gypsum Wallboard, Side A: 5/8" Type X gypsum wallboard, oriented vertically and fastened with 1-7/8" Type S drywall screws, spaced 7" oc along board perimeter and in field areas of boards. Wallboard joints are staggered from those of opposite side of wall. Exposed gypsum wallboard joints shall be taped and filled.
4.Exterior Siding, Side B: 7/16" TitanŽ panel or HardibackerŽ backerboard, oriented vertically and fastened with 1-1/2" No. 11 gauge roofing nails at 6" oc along joints and perimeter, and in field of boards. The fiber-cement board is covered with standard grade ceramic tile, nominal 1/4" thick.


Show details for DESIGN NO. JH/WA 60-04DESIGN NO. JH/WA 60-04
Show details for DESIGN NO. JH/WA 60-05DESIGN NO. JH/WA 60-05
Hide details for DESIGN NO. JH/WA 60-06DESIGN NO. JH/WA 60-06
DESIGN NO. JH/WA 60-06
SYMMETRICAL, NON-LOAD-BEARING WALL ASSEMBLY
1.Steel Studs: Minimum 3-5/8" depth 20 gauge (0.0359") galvanized steel studs, spaced 24" oc.
2.Composite Gypsum/Fibre-cement Board: Both sides of wall are faced with one layer of 5/8" TitanŽ-FR panel. Boards are oriented either horizontally or vertically. Panel joints are offset by 24" from those on opposite side of wall. Panels are fastened with minimum 1" Type S drywall screws, spaced 12" oc.
Show details for DESIGN NO. JH/WA 60-07DESIGN NO. JH/WA 60-07
Show details for DESIGN NO. JH/WA 60-08DESIGN NO. JH/WA 60-08
Show details for DESIGN NO. JH/WA 60-09DESIGN NO. JH/WA 60-09
Show details for DESIGN NO. JH/WA 60-10DESIGN NO. JH/WA 60-10




Show details for Evaluated to the following...Evaluated to the following...